RCModelScout.

ReadyMadeRC

GAUI 500X QUAD COMBO W/SCORPION MTRS, ESC, BAG, FRAME, NO GU-344

,

ReadyMadeRC

GAUI 500X QUAD COMBO W/SCORPION MOTORS, ESC, GU-344, BAG, FRAME

500X was designed based on UAV, advantages are:, , 1. Flight Efficiency: Standard Battery (2S2000mAh) time of flight for more than 12min, with a high-capacity battery, the flight time will be 20 min or more (available spreadsheet calculation), 2. Excellent wind resistance: the efficiency and load of propeller are perfectly optimized, so the wind resistance will be better than general electric aircraft, 3. High stability: When using GU-344 (three-axis stabilizing system) for the beginner or professional in combination with other electronics for FPV flying; making the GAUI Quad Flyer a very stable vehicle., 4. Additional payload capabilities: Maximum Flying Weight is between 1100g to 2200g depending on power system used (330X GAUI Motors/ESCs or 500X GAUI Motors/ESCs), you can install cameras and video recorder, and other system., Note: For users who have transplanted GAUI 330X / 330X-S power systems (motors, ESCs) to the 500X Upgrade kit, please use 8 inch propellers., Powered by:, , : type, Product packing:, , Export Carton (LNK):, , Manual:, , * The payload calculations and the battery options :, Ex 1: If the 500X carries a HD Camera (weight 350g) and uses a 3S/2000mah LiPo(weight 150g),the flying weight is 1170g (670+350+150).The power consumption in this condition is 141w(as table above).The Power of this battery is 11.1(V) * 2(A) * 60(Min.) = 1332.The flying time is about 7.1(Min.)Calculation : (1332 / 141) * 75%(Bat. Factor) = 7.1 (Min.) Ex 2: If the 500X uses 2pcs of 3S/2000mah LiPo(in parallel), the flying weight is 1050g (670+350+ 150X2).The power consumption in this condition is 167w(as table above).The total Power of the batteries is 11.1(V) * 2(A) * 60(Min.) * 2 (Bat. in parallel)= 2662.The flying time is about 12(Min.) Calculation : (2662 / 167) * 75%(Bat. Factor) = 12 (Min.)", CAUTION : The Power Consumption Table is calculated based on cruising, the ESC output current may increase 3 or 4 times more for flying mode other than cruising due to increased power output. Make sure to check flyin,

ReadyMadeRC

GAUI 500X QUAD COMBO INC MOTORS, ESC, GU-344, BAG, FRAME

500X was designed based on UAV, advantages are:, , 1. Flight Efficiency: Standard Battery (2S2000mAh) time of flight for more than 12min, with a high-capacity battery, the flight time will be 20 min or more (available spreadsheet calculation), 2. Excellent wind resistance: the efficiency and load of propeller are perfectly optimized, so the wind resistance will be better than general electric aircraft, 3. High stability: When using GU-344 (three-axis stabilizing system) for the beginner or professional in combination with other electronics for FPV flying; making the GAUI Quad Flyer a very stable vehicle., 4. Additional payload capabilities: Maximum Flying Weight is between 1100g to 2200g depending on power system used (330X GAUI Motors/ESCs or 500X GAUI Motors/ESCs), you can install cameras and video recorder, and other system., Note: For users who have transplanted GAUI 330X / 330X-S power systems (motors, ESCs) to the 500X Upgrade kit, please use 8 inch propellers., Powered by:, , : type, Product packing:, , Export Carton (LNK):, , Manual:, , * The payload calculations and the battery options :, Ex 1: If the 500X carries a HD Camera (weight 350g) and uses a 3S/2000mah LiPo(weight 150g),the flying weight is 1170g (670+350+150).The power consumption in this condition is 141w(as table above).The Power of this battery is 11.1(V) * 2(A) * 60(Min.) = 1332.The flying time is about 7.1(Min.)Calculation : (1332 / 141) * 75%(Bat. Factor) = 7.1 (Min.) Ex 2: If the 500X uses 2pcs of 3S/2000mah LiPo(in parallel), the flying weight is 1050g (670+350+ 150X2).The power consumption in this condition is 167w(as table above).The total Power of the batteries is 11.1(V) * 2(A) * 60(Min.) * 2 (Bat. in parallel)= 2662.The flying time is about 12(Min.) Calculation : (2662 / 167) * 75%(Bat. Factor) = 12 (Min.)", CAUTION : The Power Consumption Table is calculated based on cruising, the ESC output current may increase 3 or 4 times more for flying mode other than cruising due to increased power output. Make sure to check flyin,

ReadyMadeRC

GAUI 500X QUAD COMBO INC MOTORS, ESC, BAG, FRAME, NO GU-344

500X was designed based on UAV, advantages are:, , 1. Flight Efficiency: Standard Battery (2S2000mAh) time of flight for more than 12min, with a high-capacity battery, the flight time will be 20 min or more (available spreadsheet calculation), 2. Excellent wind resistance: the efficiency and load of propeller are perfectly optimized, so the wind resistance will be better than general electric aircraft, 3. High stability: When using GU-344 (three-axis stabilizing system) for the beginner or professional in combination with other electronics for FPV flying; making the GAUI Quad Flyer a very stable vehicle., 4. Additional payload capabilities: Maximum Flying Weight is between 1100g to 2200g depending on power system used (330X GAUI Motors/ESCs or 500X GAUI Motors/ESCs), you can install cameras and video recorder, and other system., Note: For users who have transplanted GAUI 330X / 330X-S power systems (motors, ESCs) to the 500X Upgrade kit, please use 8 inch propellers., Powered by:, , : type, Product packing:, , Export Carton (LNK):, , Manual:, , * The payload calculations and the battery options :, Ex 1: If the 500X carries a HD Camera (weight 350g) and uses a 3S/2000mah LiPo(weight 150g),the flying weight is 1170g (670+350+150).The power consumption in this condition is 141w(as table above).The Power of this battery is 11.1(V) * 2(A) * 60(Min.) = 1332.The flying time is about 7.1(Min.)Calculation : (1332 / 141) * 75%(Bat. Factor) = 7.1 (Min.) Ex 2: If the 500X uses 2pcs of 3S/2000mah LiPo(in parallel), the flying weight is 1050g (670+350+ 150X2).The power consumption in this condition is 167w(as table above).The total Power of the batteries is 11.1(V) * 2(A) * 60(Min.) * 2 (Bat. in parallel)= 2662.The flying time is about 12(Min.) Calculation : (2662 / 167) * 75%(Bat. Factor) = 12 (Min.)", CAUTION : The Power Consumption Table is calculated based on cruising, the ESC output current may increase 3 or 4 times more for flying mode other than cruising due to increased power output. Make sure to check flyin,

ReadyMadeRC

SKYWALKER FPV PAN/TILT POD KIT

When purchased with the pan/tilt kit, comes with a mounting plate that will fit many popular FPV cameras including:, , Note: careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., This kit will include:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required.  The system was designed for TG9e servos.  Any other servo must be aligned properly for proper gear engagement., You'll need to supply:, ,

ReadyMadeRC

RADIAN FPV PAN/TILT POD KIT

When purchased with the pan/tilt kit, comes with a mounting plate that will fit many popular FPV cameras including:, , Note: careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., This kit will include:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required.  The system was designed for HXT900/TG9e servos.  Any other servo must be aligned properly for proper gear engagement., You'll need to supply:, ,

ReadyMadeRC

PAN/TILT BASIC KIT

Comes with a mounting plate that will fit many popular FPV cameras including:, , Note: Currently the back plates are designed for the pan/tilt system being installed on top of the aircraft.  If you plan on mounting the assembly inverted under the aircraft, some modifications to the back plate may be required.  Send me an e-mail, I have some inverted mounts available., This kit includes:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required.  The system was designed for TG9e/HS-65HB servos., You'll need to supply:, ,

ReadyMadeRC

GOPROHD TILT KIT

ReadyMadeRC

GOPROHD PAN AND TILT KIT

ReadyMadeRC

CAMERA PAN AND TILT KIT

Note: careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., Comes with a mounting plate that will fit many popular FPV cameras including:, , Note: Currently the back plates are designed for the pan/tilt system being installed on top of the aircraft.  If you plan on mounting the assembly inverted under the aircraft, some modifications to the back plate may be required., This kit includes:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required.  The system was designed for the servo options listed below.  Any other servo must be aligned properly for proper gear engagement., You'll need to supply:, ,

ReadyMadeRC

RMRC-520 520 LINE CCD CAMERA (NTSC)

For users of UHF RC systems:  It has been reported that this camera may emit noise in the 433MHz range, possibly reducing the range of your LRS system.  If you are using one of these system, I recommend using one of my other cameras which have all been reported to work with no interference. I have not had any other reports of interference with other devices such as GPS receivers or other RC receivers.,

ReadyMadeRC

ASSEMBLED SKY SURFER FPV POD

,

ReadyMadeRC

ASSEMBLED EASY STAR FPV POD

,

ReadyMadeRC

RMRC-520 520 LINE CCD CAMERA (PAL)

​​Also Includes:, , For users of UHF RC systems:  It has been reported that this camera may emit noise in the 433MHz range, possibly reducing the range of your LRS system.  If you are using one of these system, I recommend using one of my other cameras which have all been reported to work with no interference. I have not had any other reports of interference with other devices such as GPS receivers or other RC receivers.,

ReadyMadeRC

RMRC-PICO-WIDE 5V (3.3-6V) ULTRA COMPACT WIDE ANGLE PAL

,